Clear Aligners and Miniscrews in a Scissor Bite Adult Treatment.

Scissor bite does not correct spontaneously. It gradually worsens by overeruption, negatively affecting masticatory function. It is intended with this manuscript to evaluate the different treatment strategies to correct this malocclusion in adult patients, exploring treatment with clear aligners, bite ramps, and MS (miniscrews), especially in this case of a patient with unilateral right scissor bite, with high dental compensation in the three planes of space, asymmetrical sagittal dental position, overeruption on the scissor bite condition, and a high mandibular arch constriction and maxillary expansion. A comprehensive literature research was performed from 2002 until March 2023. PubMed and BVS databases were used, with the following keywords: "scissor bite OR brodie bite" AND "malocclusion" AND "treatment OR correction OR therapeutics". Since correcting skeletal asymmetries after the growth completion is challenging, adult patient cases often involve a combined orthodontic-surgical approach. In the present clinical case, the severe limitations to decompensating tooth positions for a surgical treatment, with the necessity to perform lower asymmetric extraction and a must longer orthodontic treatment, were the major reasons to avoid the surgical approach, after the scissor bite correction. In spite of this, the efficiency of the clear aligners and auxiliaries like bite ramps, MS, and elastics in successfully correcting a complex scissor bite in an adult patient was demonstrated, with significant esthetic and functional commitment, demonstrated by the case reliability PAR (peer assessment rating) index.

Cardiovascular magnetic resonance in muscular dystrophies: looking ahead.

Cardiac magnetic resonance (CMR) is an established tool for risk stratification in several cardiomyopathies, and its role in muscular dystrophies (MuD) looks promising. We sought to assess how CMR performs in predicting cardiac events in a real cohort of MuD patients. A prospective single-center study with the enrollment of consecutive adult MuD patients referred to cardiac screening from 2012 to 2018 with the collection of clinical and CMR data. During follow-up (FUP), major adverse cardiac events were considered a composite of device implantation, ventricular tachycardia (VT), hospitalization due to heart failure, and death. Sixty-five patients were included (mean age of 32±16, 51% female); the majority had myotonic dystrophy (34; 52.3%); most were asymptomatic (60; 92.3%) and at sinus rhythm (64; 98.5%). CMR was abnormal in 23 (43.3%) patients: left ventricle ejection fraction (LVEF) <55% was found in 7 patients, and late gadolinium enhancement (LGE) was present in 23 patients, mainly intra-myocardial or subepicardial (10 and 8 patients, respectively). During a median FUP of 77 months (interquartile range: 33), there were 7 deaths, 8 implanted devices, and one sustained VT. LVEF<55% and the presence of LGE were associated with the occurrence of all events (log rank test, p=0.002 and p=0.045, respectively). LVEF<55% was associated with a 6-fold higher risk of events (crude hazard ratio of 6.15; 95% confidence interval of 1.65-22.93), that remained significant after adjusting for LGE presence (adjusted hazard ratio of 4.81, 95% confidence interval of 1.07-15.9). In our cohort, CMR LVEF<55% and the presence of LGE were significantly associated with adverse events during follow-up, reinforcing the role of this technique on risk stratification of MuD populations.

Influence of Ultrasound Stimulation on the Viability, Proliferation and Protein Expression of Osteoblasts and Periodontal Ligament Fibroblasts.

Among the adjunctive procedures to accelerate orthodontic tooth movement (OTM), ultrasound (US) is a nonsurgical form of mechanical stimulus that has been explored as an alternative to the currently available treatments. This study aimed to clarify the role of US in OTM by exploring different stimulation parameters and their effects on the biological responses of cells involved in OTM. Human fetal osteoblasts and periodontal ligament fibroblasts cell lines were stimulated with US at 1.0 and 1.5 MHz central frequencies and power densities of 30 and 60 mW/cm2 in continuous mode for 5 and 10 min. Cellular proliferation, metabolic activity and protein expression were analyzed. The US parameters that significantly improved the metabolic activity were 1.0 MHz at 30 mW/cm2 for 5 min and 1.0 MHz at 60 mW/cm2 for 5 and 10 min for osteoblasts; and 1.0 MHz at 30 mW/cm2 for 5 min and 1.5 MHz at 60 mW/cm2 for 5 and 10 min for fibroblasts. By stimulating with these parameters, the expression of alkaline phosphatase was maintained, while osteoprotegerin synthesis was induced after three days of US stimulation. The US stimulation improved the biological activity of both osteoblasts and periodontal ligament fibroblasts, inducing their osteogenic differentiation.

Optimization of a Photobiomodulation Protocol to Improve the Cell Viability, Proliferation and Protein Expression in Osteoblasts and Periodontal Ligament Fibroblasts for Accelerated Orthodontic Treatment.

Numerous pieces of evidence have supported the therapeutic potential of photobiomodulation (PBM) to modulate bone remodeling on mechanically stimulated teeth, proving PBM's ability to be used as a coadjuvant treatment to accelerate orthodontic tooth movement (OTM). However, there are still uncertainty and discourse around the optimal PBM protocols, which hampers its optimal and consolidated clinical applicability. Given the differential expression and metabolic patterns exhibited in the tension and compression sides of orthodontically stressed teeth, it is plausible that different types of irradiation may be applied to each side of the teeth. In this sense, this study aimed to design and implement an optimization protocol to find the most appropriate PBM parameters to stimulate specific bone turnover processes. To this end, three levels of wavelength (655, 810 and 940 nm), two power densities (5 and 10 mW/cm2) and two regimens of single and multiple sessions within three consecutive days were tested. The biological response of osteoblasts and periodontal ligament (PDL) fibroblasts was addressed by monitoring the PBM's impact on the cellular metabolic activity, as well as on key bone remodeling mediators, including alkaline phosphatase (ALP), osteoprotegerin (OPG) and receptor activator of nuclear factor κ-B ligand (RANK-L), each day. The results suggest that daily irradiation of 655 nm delivered at 10 mW/cm2, as well as 810 and 940 nm light at 5 mW/cm2, lead to an increase in ALP and OPG, potentiating bone formation. In addition, irradiation of 810 nm at 5 mW/cm2 delivered for two consecutive days and suspended by the third day promotes a downregulation of OPG expression and a slight non-significant increase in RANK-L expression, being suitable to stimulate bone resorption. Future studies in animal models may clarify the impact of PBM on bone formation and resorption mediators for longer periods and address the possibility of testing different stimulation periodicities. The present in vitro study offers valuable insights into the effectiveness of specific PBM protocols to promote osteogenic and osteoclastogenesis responses and therefore its potential to stimulate bone formation on the tension side and bone resorption on the compression side of orthodontically stressed teeth.

Shear Bond Strength of Simulated Single-Retainer Resin-Bonded Bridges Made of Four CAD/CAM Materials for Maxillary Lateral Incisor Agenesis Rehabilitation.

OBJECTIVES: Maxillary lateral incisor agenesis (MLIA), treated orthodontically by space opening, requires complimentary aesthetic rehabilitation. Resin-bonded bridges (RBBs) can be equated as interim rehabilitation until skeletal maturity is achieved to place an implant-supported crown or as definitive rehabilitation in case of financial restrictions or implant contraindications. Scientific evidence of the best material must be confirmed in specific clinical situations. Computer-aided design and computer-aided manufacturing (CAD/CAM) materials are promising versatile restorative options. This study aimed to identify a straightforward material to deliver interim or definitive RBBs for nonprepared tooth replacement in MLIA. MATERIALS AND METHODS: Single-retainer RBB made from CAD/CAM ceramic blocks (Vita Enamic [ENA], Suprinity [SUP], and zirconia [Y-ZPT]) and a three-dimensional (3D) printed material (acrylonitrile butadiene styrene [ABS]) were evaluated by shear bond strength (SBS) and mode of failure, after adherence to an artificial tooth with RelyX Ultimate used in a three-step adhesive strategy. STATISTICAL ANALYSIS: The load to fracture (N) was recorded, and the mean shear stress (MPa) was calculated with standard deviations (SD) for each group and compared between materials using boxplot graphics. One-way analysis of variance (ANOVA) followed by the Tukey-Kramer post hoc test was used to compare the differences (α = 0.05). A meta-analysis focusing on CAD/CAM materials evaluated the magnitude of the difference between groups based on differences in means and effect sizes (α = 0.05; 95% confidence interval [CI]; Z-value = 1.96). Failure mode was determined by microscopic observation and correlated with the maximum load to fracture of the specimen. RESULTS: The mean ± SD SBS values were ENA (24.24 ± 9.05 MPa) < ABS (24.01 ± 1.94 MPa) < SUP (29.17 ± 4.78 MPa) < Y-ZPT (37.43 ± 12.20 MPa). The failure modes were mainly adhesive for Y-ZPT, cohesive for SUP and ENA, and cohesive with plastic deformation for ABS. CONCLUSION: Vita Enamic, Suprinity, Y-ZPT zirconia, and 3D-printed ABS RBBs are optional materials for rehabilitating MLIA. The option for each material is conditioned to estimate the time of use and necessity of removal for orthodontic or surgical techniques.

Efficiency and Predictability of Coronal Maxillary Expansion Repercussion with the Aligners System: A Retrospective Study.

The Invisalign® system (SmartForce® G8) aims to guarantee aesthetics and provide good orthodontic treatment results. Dentoalveolar expansion is possible with clear aligners and can be used to correct dentoalveolar crossbite, resolve crowding or modify the arch shape. Despite the treatment's effectiveness, there is still disagreement among professionals concerning its true clinical potential. This study aimed to analyze the effectiveness and predictability of coronal tooth expansion movement in permanent dentition in patients who had completed the first phase of treatment with Invisalign® orthodontic aligners. MATERIALS AND METHODS: The tooth movement tables of 75 previously selected cases were analyzed in terms of dental-arch width and expansion efficiency, through the Invisalign® platform, considering the pre-treatment (T0), planned treatment (TP) and post-treatment models (T1) using ClinCheck Pro® 6.0 software. All patients were treated by an orthodontic specialist and Invisalign® Diamond Provider in a private practice (T.P.). RESULTS: Difference between T1 and T0: for each maxillary and mandibular measurement, there was a statistically significant difference between pre- and post-aligner treatment values. The greatest amount of expansion occurred in both the upper and the lower premolars. Difference between TP and T1: for each maxillary measurement, statistically significant differences were verified for the molar and canine. At the mandibular level, statistically significant differences were only verified in the first molar. CONCLUSIONS: The Invisalign® clear aligners are effective for simultaneous intra-arch expansion in both jaws.

Pulmonary valve replacement in tetralogy of Fallot - who and how?

BACKGROUND AND AIM: Pulmonary regurgitation is the most common complication in repaired tetralogy of Fallot patients. Severe chronic pulmonary regurgitation can be tolerated for decades, but if not treated, it can progress to symptomatic, irreversible right ventricular dilatation and dysfunction. We investigated clinical associations with pulmonary valve replacement among patients with significative pulmonary regurgitation and how interventional developments can change their management. METHODS: All adult patients with repaired tetralogy of Fallot who were followed at an adult CHD Clinic at a single centre from 1980 to 2022 were included on their first outpatient visit. Follow-up was estimated from the time of correction surgery until one of the following events occurred first: pulmonary valve replacement, death, loss to follow-up or conclusion of the study. RESULTS: We included 221 patients (116 males) with a median age of 19 (18-25). At a median age of 33 (10) years old, 114 (51%) patients presented significant pulmonary regurgitation. Among patients with significant pulmonary regurgitation, pulmonary valve replacement was associated with male gender, older age at surgical repair, and longer QRS duration in adulthood. Pulmonary valve replacement was performed in 50 patients, including four transcatheter pulmonary valve implantations, at a median age of 34 (14) years. CONCLUSION: Pulmonary regurgitation affects a large percentage of tetralogy of Fallot adult patients, requiring a long-term clinical and imaging follow-up. Sex, age at surgical repair and longer QRS are associated with the need of PVR among patients with significative pulmonary regurgitation. Clinical practice and current literature support TPVI as the future gold standard intervention.

Coronal Repercussions of the Maxillary Central Incisor Torque in the First Set of Aligners: A Retrospective Study.

Coronal torque is one of the key factors in orthodontic treatment. An adequate torque value has an impact on aesthetics and soft tissue profile. The aim of this quantitative, comparative and observational longitudinal cohort study was to analyze the efficacy of the maxillary central incisor coronal torque in the Invisalign® system and evaluate the relation between coronal torque movement and patient's facial biotype. In total, 27 patients were selected. The planned movements (TP) were obtained from the Invisalign Doctor Site® using mathematical formulas that consider the T0 measurements. Pre-treatment (T0) and after full use of the first set of aligners (T1) scanners were evaluated using Geomagic® Control X TM by superimposing T0 and T1 models using a transverse plane and the long axis of the tooth crown. IBM® SPSS® software was used for statistical purposes. We found statistically significant differences between T0 and T1 in pro-inclination and retro-inclination, as well as between achieved and planned values in pro-inclination (p = 0.011). We verified that hyperdivergent clinical cases presented higher mean values of coronal torque, and hypodivergent cases presented lower values. In pro-inclination, the differences between the planned and achieved values were greater in hypodivergent cases and smaller in hyperdivergent cases. In retro-inclination, the differences between the planned and achieved values were greater in normodivergent cases and smaller in hypodivergent cases. This study highlights that inefficacy is more accentuated in pro-inclination. Aligners are an effective tool for producing coronal repercussions of torque movement, being more effective in retro-inclination.

Accuracy of Invisalign® on Upper Incisors: A Systematic Review.

The current systematic review appraises the effectiveness of the types of tooth movements performed with Invisalign® clear aligner on the maxillary incisors. An electronic literature search of published trials was performed through PubMed, LILACS, Scopus, Cochrane Library, and Web of Science databases, and selected journals, from 2009 to 2020. Out of 291 references, five relevant publications were identified for analysis: four studies were performed retrospectively and one prospectively, all non-randomized. Despite the limited set of selected articles, the sample size is significant, with 148 subjects included in the reviewed studies involving the orthodontic treatment of upper incisors. We concluded that movements with the Invisalign® clear aligner on the upper incisors present distinct accuracy, possibly related with movement complexity; intrusion of the incisors has low accuracy (in some cases, 0% of accuracy was reported when the tooth extruded), while incisor extrusion exhibit some of the highest accuracy values reported in the included studies (45%-142%, when the achieved movement was greater than the predicted). Besides, axial (i.e., torque and tip) and horizontal (i.e., translation and rotation) movements are usually effective, with accuracy values between 39%-156% and 42%-79%, respectively. Overall, we determined that the efficiency of aligner to reach the desired movements in the upper incisors was low, as often refinements were required in the included studies. The use of aligner features must be more often considered to improve movement accuracy.

Scissor Bite in Growing Patients: Case Report Treated with Clear Aligners.

Scissor bite (SB.) is a rare malocclusion that is challenging to diagnose and is often associated with a retrognathic mandible and a series of functional and structural abnormalities that negatively affect the patient. This article intends to analyze the treatment approaches applied to growing patients younger than 16 years old, comparing the conventional appliances described in the literature and a clinical case treated with clear aligners with mandibular advancement (MA.). SB is primarily related to skeletal Class I and II, according to Angle classification. In the various cases analyzed, it can also be mentioned as a significant number of cases with SB of dental origin (seven of dental and four of skeletal) in young patients. In children and adolescents who still have growth potential, the therapeutic possibilities are numerous. A comprehensive literature search was manually performed from 2002 until January 2023, in PubMed and BVS databases with the following conjugated keywords: "scissor bite OR brodie bite" AND "malocclusion" AND "treatment OR correction OR therapeutics". The present case report on a young patient demonstrated the efficiency of the clear aligners with MA to correct an SB, associated with several functional and structural anomalies such as Class II division 1 with an increased overjet and overbite as well as a severe curve of Spee in a hypodivergent biotype.

Esthetic Perception of Different Clinical Situations of Maxillary Lateral Incisor Agenesis According to Populations with Dental and Non-Dental Backgrounds: A Systematic Review and Meta-Analysis.

Treatment of unilateral or bilateral maxillary lateral incisor agenesis is challenging, time-consuming, expensive, and requires careful treatment planning, predictability, and esthetics. This review aimed to identify differences in esthetic perception among orthodontists, general dentists, differentiated dentists, and laypersons, which may interfere with treatment options. EBSCO, PubMed, ScienceDirect, Cochrane Library databases, and Google Scholar were searched using keyword pairing and a Boolean expression, "(congenitally missing OR agenesis OR hypodontia) AND (maxillary lateral incisors) AND (esthetic perception OR smile) AND (laypersons OR dental professional OR general dentist OR orthodontists)." Reviews and case studies were excluded. A total of 13 studies were selected for qualitative analysis (adapted ROBINS-I) and 11 were selected for meta-analysis (p < 0.05) after being sub-grouped into "Opening vs. Closure" and "No remodeling vs. Dental remodeling vs. Dental and gingival remodeling" groups. A meta-analysis evaluated the magnitude of the difference between groups based on differences in means and effect sizes (α = 0.05; 95% CI; Z-value 1.96), revealing that the esthetic perception of maxillary lateral incisor agenesis treatment remains controversial even among professionals. Gingival remodeling was not valued compared to isolated dental remodeling. Studies lack rigorously comparable methodologies. Discussion with the patient is pertinent in doubtful situations, as the best treatment option remains unclear, and overtreatment should be avoided.

Functional characterization of a novel PRRT2 variant found in a Portuguese patient with hemiplegic migraine.

Familial hemiplegic migraine (FHM) is a rare autosomal-dominant form of migraine with aura. Three disease-causing genes have been identified for FHM: CACNA1A, ATP1A2 and SCN1A. However, not all families are linked to one of these three genes.PRRT2 variants were also commonly associated with HM symptoms; therefore, PRRT2 is hypothesized as the fourth gene causing FHM. PRRT2 plays an important role in neuronal migration, spinogenesis, and synapse mechanisms during development and calcium-dependent neurotransmitter release. We performed exome sequencing to unravel the genetic cause of migraine in one family, and a novel PRRT2 variant (c.938C > T;p.Ala313Val) was identified with further functional studies to confirm its pathogenicity. PRRT2-A313V reduced protein stability, led to protein premature degradation by the proteasome and altered the subcellular localization of PRRT2 from the plasma membrane (PM) to the cytoplasm. We identified and characterized for the first time in a Portuguese patient, a novel heterozygous missense variant in PRRT2 associated with HM symptoms. We suggest that PRRT2 should be included in the diagnosis of HM.

Occlusal Changes with Clear Aligners and the Case Complexity Influence: A Longitudinal Cohort Clinical Study.

BACKGROUND: Clear aligners (CA) are used 22 h daily, creating a bite-block effect. This work aims to (i) analyze occlusal changes before the beginning of treatment, after the first set of CA and after the use of additional aligners; (ii) compare planned occlusal contacts with the ones obtained after the first set of CA; (iii) analyze the occlusal changes occurred after reaching the orthodontic goals after 3 months of using CA only at night; (iv) evaluate and characterize which tooth movements did not allow the treatment to be completed at the end of the first set of aligners, and finally (v) verify the possible relation between the changes in occlusal contact and areas and parameters such as case complexity and facial biotype. MATERIALS AND METHODS: A quantitative, comparative, and observational longitudinal cohort study design was implemented to evaluate the clinical data and the complexity levels of cases receiving CA. A non-probabilistic and convenience sample of 82 individuals was recruited. The orthodontic malocclusion traits were classified as simple, moderate, or complex corrections based on the basis of the Align® recommendations with the Invisalign® evaluation tool. According to the Invisalign® criteria, patients need only one complex problem for their case to be classified as complex. Meshlab® v. 2022.02, ClinCheck® version Pro 6.0, My-Itero® version 2.7.9.601 5d plus, and IBM® SPSS Statistics software (Statistical Program for Social Sciences), version 27.0 for Windows were the software® used. RESULTS: A statistically significant decrease in area and occlusal contacts number were observed from before the start of orthodontic treatment (T0) to the end of treatment (T1). The changes in the occlusal area (from T0 to T1) were statistically different between hyperdivergent (28.24 [15.51-40.91]) and hypodivergent (16.23 [8.11-24.97]) biotypes (p = 0.031). A significant difference between the hyperdivergent (4.0 [2.0-5.0]) and normodivergent (5.5 [4.0-8.0]) group was found in T1 for the anterior contacts (p = 0.044). Anterior contacts obtained were significantly higher than the planned (p = 0.037) Between T1 and T2 statistically significant increases of occlusal areas, posterior and total contacts were observed. CONCLUSIONS: Occlusal contact and area were decreased, either at the end of the first set or after the use of additional aligners. Anterior occlusal contacts obtained were higher than planned as opposed to posterior occlusal contacts obtained. The hardest tooth movements to achieve to complete the treatment were distalization, rotation, and posterior extrusion. After completing orthodontic treatment (T1) to 3 months after (T2) using additional aligners only at night, posterior occlusal contacts were significantly increased, which could be due to the natural settling of the teeth in this period.

Effectiveness of Self-Adhesive Resin Luting Cement in CAD-CAM Blocks-A Systematic Review and Meta-Analysis.

Self-adhesive resin cements (SARCs) are used because of their mechanical properties, ease of cementation protocols, and lack of requirements for acid conditioning or adhesive systems. SARCs are generally dual-cured, photoactivated, and self-cured, with a slight increase in acidic pH, allowing self-adhesiveness and increasing resistance to hydrolysis. This systematic review assessed the adhesive strength of SARC systems luted to different substrates and computer-aided design and manufacturing (CAD/CAM) ceramic blocks. The PubMed/MedLine and Science Direct databases were searched using the Boolean formula [((dental or tooth) AND (self-adhesive) AND (luting or cement) AND CAD-CAM) NOT (endodontics or implants)]. Of the 199 articles obtained, 31 were selected for the quality assessment. Lava Ultimate (resin matrix filled with nanoceramic) and Vita Enamic (polymer-infiltrated ceramic) blocks were the most tested. Rely X Unicem 2 was the most tested resin cement, followed by Rely X Unicem > Ultimate > U200, and µTBS was the test most used. The meta-analysis confirmed the substrate-dependent adhesive strength of SARCs, with significant differences between them and between SARCs and conventional resin-based adhesive cement (α < 0.05). SARCs are promising. However, one must be aware of the differences in the adhesive strengths. An appropriate combination of materials must be considered to improve the durability and stability of restorations.

Masticatory Function in Individuals with Temporomandibular Disorders: A Systematic Review and Meta-Analysis.

The literature search was performed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) protocol in the PubMed, Cochrane Library, LILACS, EBSCO, Scielo, between 2012 and 2022. The methodological quality was assessed by using the Newcastle-Ottawa Study Quality Assessment Scale. Mean differences and 95% confidence intervals were calculated and combined in meta-analyses. A total of 1202 participants were included in this systematic review (690 with TMD; 512 without TMD), with 22 articles being included in the qualitative analysis. Only three studies enabled the comparative analysis of the results. Ten articles showed a high methodological quality and a low risk of bias, and twelve had a low methodological quality and an increased risk of bias. The meta-analysis showed that the differences between the intervention and control groups were not statistically significant for the percentage overlapping coefficient of the anterior temporal muscle, for the masseter, and for the torque coefficient. The parameters analyzed with the compound technique for chewing showed altered mandibular functions in individuals with TMD. With the EMG method, it was possible to suggest that TMD in adult individuals causes compensatory muscle behaviors, and several changes in the masticatory function were found.

Impact of in vitro findings on clinical protocols for the adhesion of CAD-CAM blocks: A systematic integrative review and meta-analysis.

STATEMENT OF PROBLEM: Computer-aided design and computer-aided manufacturing (CAD-CAM) blocks have evolved rapidly, making it difficult to establish the best clinical protocol for bonding a given block and whether an established protocol is appropriate for a newly introduced product. PURPOSE: This integrative systematic review and meta-analysis aimed to clarify whether the clinician can select the most efficient adhesion protocols for CAD-CAM blocks by reading published in vitro studies and implementing them in daily practice. MATERIAL AND METHODS: Based on the population, intervention, comparison, and outcome (PICO) strategy, 3 databases were searched for in vitro studies, randomized clinical trials, prospective or retrospective studies, and case reports from January 1, 2015, to July 31, 2021. A meta-analysis analyzed 28 studies to calculate the mean difference between best and worst protocols for each author and block with a random-effects model (α=.05). RESULTS: From 508 relevant studies, 37 in vitro studies, 2 clinical studies, and 1 clinical report were selected for data extraction and qualitative analysis. Vita Enamic, IPS e.max CAD, LAVA Ultimate, and Vita Mark II blocks were the most studied, and RelyX Ultimate was the most used luting cement. The meta-analysis confirmed the null hypothesis that the evidence-based efficacy of clinical protocols to bond CAD-CAM blocks is still controversial (P<.05). CONCLUSIONS: There are objective standards for individual in vitro tests, but the studies lack standardization. Some tested protocols were more efficient than others. Randomized clinical trials and well-documented clinical situations were almost nonexistent, making direct application of in vitro findings in clinical practice impossible.

Interceptive Treatment with Invisalign® First in Moderate and Severe Cases: A Case Series.

The increasing demand for more aesthetic/comfortable orthodontic alternatives fostered the utilization of clear aligners in recent years. However, the efficacy of clear aligners for treating complex malocclusions is often treated with scepticism. This case series aims to evaluate the predictability of the Invisalign® First system in moderate and severe cases requiring interceptive orthodontic treatments in mixed dentition. A total of 23 patients with 102 interceptive orthodontic malocclusion traits were selected for orthodontic treatment with Invisalign® First and were examined over 18 months (Phase 1). Clinical assessments included ClinCheck® predictions, cephalometric measurements, and measuring tools commonly used to quantify tooth movement. Measurements taken at the beginning and end of the treatment were compared. The complexity degree of each case was established based on the set of problems presented by each patient. All treatment objectives were achieved within 18 months, except for two Class II cases, with 69% of them solved with the first set of aligners. Additional aligners were used in the remaining cases. Even though these 23 cases suggest that the Invisalign® First (Phase 1) may be effective in most interceptive problems, controlled randomized clinical trials are required to evaluate movement predictability and how this relates to the problem complexity and additional aligners required.

Effects of Seed Roasting Temperature on Sesame Oil Fatty Acid Composition, Lignan, Sterol and Tocopherol Contents, Oxidative Stability and Antioxidant Potential for Food Applications.

Roasting is a key step for preparing sesame oil that leads to important changes in its organoleptic properties and quality. In this study, white sesame seeds were roasted for 20 min in an electric oven at different temperatures (120, 150, 180, 210, 250 and 300 °C). The oils extracted from unroasted and roasted seeds were compared for their chemical composition: fatty acids (including trans isomers), phytosterols, lignans (sesamin and sesamolin), tocopherols and total phenolic compounds, as well as their oxidative stability and antiradical capacity. There were no obvious differences in the oil densities, refractive indexes or iodine values, but the saponification values were affected by temperature. Relevant primary and secondary lipid oxidation were observed at T > 250 °C, resulting in a higher p-anisidine value and K232 as well as K268 values. Roasting improved oil yield (from 33.5 to 62.6%), increased its induction period (from 5.5 to 10.5 h) and enhanced the total phenolic content (from 152 to 194 mg/100 g) and antiradical activity of the extracted oil. Depending on roasting temperature, a gradual decline was recorded in total amounts of phytosterols (up to 17.4%), γ-tocopherol (up to 10.6%), sesamolin (maximum of 27.5%) and sesamin (maximum of 12.5%). All the investigated oils presented a low quantity in triglyceride polymers, clearly below the maximum tolerated quantity according to the European regulation. The optimal roasting temperature for obtaining high nutritional grade oil within the permissible values was 210 °C. The unsaponifiable components (including lignans and sterols) extracted from roasted seeds have been shown to be natural additives to fresh meatball products to extend shelf life. The results of this study may help to boost the nutritional content of plant-based diets by allowing for the use of roasted sesame seed oil and its components.

Infraocclusion level and root resorption of the primary molar in second premolar agenesis: A retrospective cross-sectional study in the Portuguese population.

BACKGROUND: Mandibular second premolar (M2P) agenesis results in the second primary molar (2pm) retention, infraocclusion, a reduced alveolar height and width, the supraeruption of antagonists, or the movement of the adjacent teeth. Infraocclusion affects the survival of the retained 2pm to a greater extent than root resorption. OBJECTIVES: The aim of the study was to evaluate the lifespan of the primary molar as a substitute, with root quality and occlusal adaptation, in cases of M2P agenesis in a low-income population to determine if the attitude of just vigilance could be the best clinical option whenever other clinical problems are absent. MATERIAL AND METHODS: A total of 12,949 orthopantomograms were analyzed. Sixty-one patients (25 males and 36 females aged 7­36 years) were divided into group 1 (the first permanent molar in occlusion) and group 2 (the second permanent molar also in occlusion). Vertical positioning to the occlusal plane, root condition and the movement of the adjacent teeth were evaluated. RESULTS: Despite the study having a cross-sectional design, root resorption, infraocclusion, the distance between the first permanent molar and the first primary molar or the first permanent premolar, and the width of the 2pm were correlated with age. The 2pm root resorption increased with age, which was more pronounced when the second permanent molar was also in occlusion. The mesial movement of the adjacent teeth was absent in all groups. The 2pm was often occluded, but infraocclusion increased with age. Age periods of 11­15 years and 21­25 years were critical for the primary tooth loss. CONCLUSIONS: The second primary molar remains functional in the mandibular arch for up to 25 years. A well-documented no-intervention attitude based on clinical and radiographic data must be weighed in cases without orthodontic issues or with financial constraints.

Analytical Methods for Determination of BPA Released from Dental Resin Composites and Related Materials: A Systematic Review.

Knowing the impacts of bisphenol A (BPA) on human health, this systematic review aimed to gather the analytical methods for the quantification of BPA release of BPA in dental materials in in vitro and in vivo (biological fluids) studies. A brief critical discussion of the impacts of BPA on human health and the possible association with BPA in dental materials was also presented. The research was carried out by three independent researchers, (according to PRISMA guidelines) in PUBMED and SCOPUS databases, by searching for specific keywords and articles published between January 2011 and February 2022. Seventeen articles met the eligibility criteria and were included in this systematic review: 10 in vitro and 7 in vivo. In in vitro studies, the highest amounts of BPA released were from flowable to conventional resins, followed by resin-modified glass ionomer. In contrast, the smallest amount was released from "BPA-free" composites and CAD-CAM blocks. Regarding in vivo studies, a higher concentration of BPA were found in saliva than urine or blood. The best analytical method for trace quantifying BPA is LC-MS/MS (Liquid Chromatography with Tandem Mass Spectrometry) due to its selectivity, low quantification limits, and the unequivocal identification. However, further studies are required to develop faster and more sensitive methods, in order to obtain more reliable results.